4. SET UP AND FUNCTION
4.1. BRASS CHROME PLATED VERSION
EN
4.2. BRIEF DESCRIPTION
The operation of cylinder regulator works manual with the handwheel. The inlet and outlet pressure are
displayed on the inlet and outlet pressure gauge. Di erent components could be additional for handling:
•
Shut-o valve at outlet to shut o outlet pressure.
•
Regulating valve at outlet to regulate outlet pressure.
•
Inert Gas Purge Valve with Check Valve at the inlet
5. TRANSPORT, PACKAGING AND STORAGE
TIPS AND
RECOMMENDATIONS!
•
The installation and start- up of this cylinder regulator is normally done by the supplier or by authorized
personnel.
•
Even though there can be some users or maintenance personnel who care about the packaging. The fol-
lowing notes should be observed accordingly.
5.1. SAFETY INFORMATION FOR TRANSPORTATION
NOTE!
•
Damages caused by inappropriate transportation!
•
If transported inappropriately, consignments can fall or topple over. This can cause considerable property
damage.
•
When unloading the consignments on delivery and transporting them on the premises, act with caution
and observe the symbols and warnings on the packaging.
•
Use only the attachment points provided.
•
Do not remove the packaging until you are ready to assemble the regulator.
18/56