How To Power-On - EcoFlow EFWAVE2 User Manual

How to Power-on

This product supports multiple power supply methods. Open the charging port cover before
using it, then power on. Please close the cover to prevent dust during charging, and wind the
AC charging cable around the winder.
For shutdown, please press and hold the power button before removing the charging
cable. Do not directly remove the cable to avoid damaging the battery cell.
AC Outlet
Wave 2 supports an AC voltage from 100-240V. Please use the original AC charging cable
and make sure the working current of the outlet should continuously exceed 10A .
Battery pack
The EcoFlow Wave 2 add-on battery or EcoFlow portable power stations (DELTA and DELTA
2 series are recommended) can be used to supply power to Wave 2. These products and
cables can be purchased on official EcoFlow channels.
1. Wave 2 Add-on Battery
outlet
AC charging
AC
12