Table of Contents
Advertisement
C A R E A N D C L E A N I N G
Charcoal lter
Light cover
Light cover screw
Vent grille
4. Remove the charcoal lter.
5. Open the light cover by removing the light cover
screw, then carefully pull up on the front edge.
6. Unplug the wire harness of the lamp, remove
the old light bulb, and replace it.
7. Replace the microwave light cover by carefully
pushing it into place, then replace the mounting
screws.
8. Push the vent grille back into place and replace
the vent grille mounting screws.
34
Advertisement
Table of Contents
