Controls - Sharp Carousel SMO1969JS Operation Manual

C O N T R O L S
SETTING THE CLOCK
When the oven is first plugged in, the display will flash "12:00" and a tone will sound. If the AC power ever goes
off, the display will show "12:00" when the power comes back on.
1. Press the CLOCK pad.
This is a 12 hour clock system.
2. Enter the correct time of day by
pressing the number pads in
sequence.
3. Press START/+30 SEC pad.
NOTE:
1. If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound. Press the
CLOCK pad and re-enter the time.
2. If you want to turn sound on or off, press and hold CLOCK pad for 3 seconds. For detailed information on
this feature, see Controls section, page 29.
SETTING THE TIMER
Timer operates as a minute timer.
Timer operates without microwave energy.
HOW TO USE AS A MINUTE TIMER
1. Press TIMER/FILTER pad.
2. Press the amount of time you want
to count down.
3. Press START/+30 SEC pad.
When you press the START/+30 SEC pad, the TIME indicator starts blinking and the display counts down the time
remaing in TIMER mode.
When TIMER mode ends, you will hear 2 beeps . To end the timer early, press the TIMER/FILTER pad once
while the display is counting down.
Pressing the STOP/CLEAR button also stops the timer early.
The current CLOCK is displayed.
This digital clock allows you to set from 1:00 to
12:59.
The TIMER indicators display and " TIMER"
"ENTER TIME" is displayed.
The display will show what you pressed.
17