Table of Contents
Advertisement
X7DA3+ User's Manual
IDE Channel 0 Master/Slave, Secondary Master/Slave, SATA Port2,
SATA Port3
These settings allow the user to set the parameters of IDE Channel 0 Master/Slave,
Secondary Master/Slave, SATA Port2, SATA Port3 slots. Hit <Enter> to activate
the following submenu screen for detailed options of these items. Set the correct
confi gurations accordingly. The items included in the submenu are:
Type
This option allows the user to select the type of IDE hard drive. The option
Auto will allow the BIOS to automatically confi gure the parameters of the
HDD installed at the connection. Enter a number between 1 to 39 to select a
predetermined HDD type. Select User to allow the user to enter the parameters
of the HDD installed. Select CDROM if a CDROM drive is installed. Select
ATAPI if a removable disk drive is installed.
Total Sectors: This item displays the number of total sectors available in the
LBA Format.
Maximum Capacity: This item displays the maximum capacity in the LBA
Format.
Multi-Sector Transfer
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors, and
16 Sectors.
4-4
Advertisement
Table of Contents
