Table of Contents
Advertisement
X7DA3+ User's Manual
D-2
Installing the Windows XP/2000/2003 for systems
with RAID Functions
New Operating System-Windows XP/2000/2003 Installation
1. Insert the Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and the
system will start booting up from CD.
2. Press the <F6> key when the message-" Press F6 if you need to install a third
party SCSI or RAID driver" displays.
3. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify
additional device(s).
4. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ESB2 into Drive
A: and press the <Enter> key.
5. Choose the Intel(R) ESB2 SATA RAID Controller from the list indicated in the
XP/2000/2003 Setup Screen, and press the <Enter> key.
6. Press the <Enter> key to continue the installation process. (If you need to specify
any additional devices to be installed, do it at this time.) Once all devices are speci-
fi ed, press the <Enter> key to continue with the installation.
7. From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The
XP/2000/2003 Setup will automatically load all device fi les and then, continue the
Windows XP/2000/2003 installation.
8. After Windows XP/2000/2003 Installation is completed, the system will automati-
cally reboot.
Note: the current version of the ESB2 SATA RAID Utility can only support the
Windows XP/2000/2003 Operating System.
D-10
Advertisement
Table of Contents
