Supermicro X7DA3 Plus User Manual page 105

Supermicro x7da3 plus motherboards: user guide

Table of Contents

Appendix C: Installing the Adaptec HostRAID Utility and the Windows OS

Rebuilding Arrays

Note 1: You can use Rebuilding on Fault Tolerant array (RAID 1) only.

If an array Build or Initialization process is interrupted or critical with one member

missing, you must perform a Rebuild to get the array to the Optimal status. For a

critical array Rebuild operation, the optimal drive is the source drive.

Note 2: If no spare array exists and a hard disk drive fails, you need to create a spare

before you can rebuild an array.

To Rebuild an array:

1 From the Main Menu, select Manage Arrays (as shown in the screen below). From

the List of Arrays, select the array you want to Rebuild.

2 Press <Ctrl> <R> for Array Rebuild.

C-13

Table of Contents