Table of Contents
Advertisement
Appendix C: Installing the Adaptec HostRAID Utility and the Windows OS
To Set Controller Confi guration:
3. Select "Controller Confi guration" and press <Enter> to access the submenu as
shown below:
4. Use the arrow keys to select an item. Then, press <Enter> and the arrow keys to
confi gure the setting for the item selected.
5. To load the default settings, press <F6>.
(Note: The default setting for each item is listed below:
Runtime BIOS: Enabled,
BBS Support: Device,
POST Banner Display: Enabled,
CTRL-A Message Display: Enabled,
Physical Drives Display during POST: Enabled,)
6. Press <Esc> to return to the previous menu and to exit the utility.
C-15
Advertisement
Table of Contents
