Connecting To A 10 Mbps Printer From A Hub That Is Operating At 100 Mbps - Intel Express 10/100 Stackable Hub Ethernet Module User Manual

Ethernet module
8
Connecting to a server at full-duplex
Change Auto-negotiate
duplex
Full-duplex
Half-duplex
This is an Ethernet Module plugged into a hub running at 10 or 100
Mbps. The module is then connected to a server with an Intel
EtherExpress™ PRO/100 LAN Adapter using CAT 5 TPE cable. Use
the MDI-X connector on the Ethernet Module.
You don't need to configure the Ethernet Module or the LAN adapter
to establish a full-duplex connection at 100 Mbps. However, if you
don't get a full-duplex connection at 100 Mbps, force the speed and
duplex on both the module and the adapter (see steps 1-4 on page 7).
Connecting to a 10 Mbps printer from
a hub that is operating at 100 Mbps
To connect to a 10 Mbps-only printer through a 10 Mbps hub, use the
MDI connector on the Ethernet Module. To connect directly to a
10 Mbps print server, use the MDI-X connector.
Express 10/100
Stackable Hub
Intel Express
10/100 Stackable Hub
Ethernet Module
Change hub speed
Auto-negotiate Auto-negotiate (100 Mbps)
Full-duplex 100 Mbps 10BASE-T Collision Power
Half-duplex 10 Mbps 100BASE-TX Managed
Status
1 2 3 4 5 6 7 8 9 10 11 12 Green (left)
Link = solid
Activity = blink
Amber (right)
Wrong speed = blink
Disabled = solid
10 Mbps hub
(10 Mbps)
Category 3,
4, or 5 TPE
Notes on connecting to a device at full-duplex
1 If you're unsure of a device's auto-negotiation capabilities, force
the duplex mode of the Ethernet Module to ensure you'll get a full-
duplex connection.
2 Your performance with a full-duplex connection will vary
depending on your network. If you have problems, it's safest to
establish a half-duplex connection.
Get other manuals https://www.bkmanuals.com
Ethernet Module
or
Auto-negotiate
Change
speed
100 Mbps
10 Mbps
MDI MDI-X
Ethernet module
Category 3,
4, or 5 TPE
Coll
Express 10/100
Stackable Hub
Intel Express
10/100 Stackable Hub
Ethernet Module
Change hub speed
Auto-negotiate (100 Mbps)
Auto-negotiate
Full-duplex 100 Mbps 10BASE-T Collision Power
Half-duplex 10 Mbps 100BASE-TX Managed
Status
1 2 3 4 5 6 7 8 9 10 11 12 Green (left)
Link = solid
Activity = blink
Amber (right)
Wrong speed = blink
Disabled = solid
(10 Mbps)