Emptying The Dirty Water Tank - Bissell CROSSWAVE CORDLESS PROFESSIONAL 2582H User Manual

Emptying the Dirty Water Tank

WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
1
To release Dirty Water
Tank, press down on
recessed button on the
top of the tank.
Did You Know?
The float is what prevents your Dirty Water Tank from overflowing. When your Dirty
Water Tank is full, the float will shut off your suction motor creating a high-pitched
sound indicating it is time to empty your Dirty Water Tank.
4
Remove strainer from
Dirty Water Tank, then
throw debris in trash.
7
Hand wash the filter and screen with
warm water and mild detergent.
2
Grab the front handle while
pressing down on button
and pull Dirty Water Tank
away from the unit.
5
Pour dirty water out into
sink. Rinse the inside of
the Dirty Water Tank.
8
3
Grasp top of Dirty Water
Tank in recessed areas on
each side of the filter and
pull upward to remove the
top of the tank.
6
Remove the filter from
the top of the Dirty Water
Tank by pulling it up.
Rinse the float located at the bottom
of the top of the Dirty Water Tank.
global.BISSELL.com
11