Yamaha GRIZZLY YFM70GPXJ 2017 Owner's Manual page 38

To reset a tripmeter, set the display to the tripme-
ter you want to reset, then push the "RESET" but-
ton for three seconds.
TIP
 The odometer will lock at 99999.
 The tripmeters will reset and continue counting
after 9999.9 is reached.
4
Clock and hour meter
The clock displays time in 12-hour format.
The hour meter shows the total time the engine
has been running.
Push the "CLOCK" button to switch between the
clock "CLOCK" and the hour meter mode
"HOUR" in the following order:
CLOCK → HOUR → CLOCK
To set the clock
1. Set the display to the clock.
2. Push both the "SELECT" button and "RE-
SET" button for three seconds. The hour dig-
its will start flashing.
3. Push the "RESET" button to set the hours.
4. Push the "SELECT" button, and the minute
digits will start flashing.
5. Push the "RESET" button to set the minutes.
6. Push the "SELECT" button and then release
it to start the clock.
Fuel gauge
The fuel gauge indicates the amount of fuel in the
fuel tank. The display segments of the fuel gauge
disappear from "F" (full) towards "E" (empty) as
the fuel level decreases. When the "E" segment
disappears and the fuel level warning indicator
flashes, refuel as soon as possible.
TIP
The fuel gauge is equipped with a self-diagnosis
system. If the fuel gauge electrical circuit is not
working correctly, all display segments and the
fuel level warning indicator will flash repeatedly. If
this occurs, have a Yamaha dealer check the ve-
hicle.
4-6