Table of Contents
Advertisement
Leveling Device
When mounting hood on the wall, the level can be adjusted by turning the two screws on the
motor housing.
Installation Alternatives
The cooker hood can be installed in the following ways:
Circulating indoor air (A)
Outdoor venting (B)
REMEMBER!
The distance between the top of the hob and the lowest part of the cooker hood must be at
least 65 cm.
If a two-part connection tube is used, the lower section must sit outside the upper
sec-tion.
Do not connect the cooker hood exhaust to a duct used to circulate hot air or vent steam
from another appliance.
Always use protective gloves when installing the appliance!
6
Advertisement
Table of Contents
