TEFAL Turbo Cuisine CY754830 Manual page 20

Problem
Steam leakage from lid.
Food is uncooked
E0 displayed on the
digital screen.
E1 displayed on the
digital screen.
E2 displayed on the
digital screen.
36
Possible reasons
The sealing gasket is not
properly installed.
The sealing gasket is dirty.
The sealing gasket is
damaged, or the edge of the
cooking pot is damaged.
Solid/liquid ingredients ratio
is incorrect.
No electricity from the power
supply.
Pressure switch is faulty.
The temperature sensor
is faulty.
The lid is not properly
positioned for your cooking
program. Each program
requires a specific lid position.
Solutions
Remove the sealing gasket,
clean it and reinstall it in the
correct position.
Remove the sealing gasket,
clean it and reinstall it in the
correct position.
Send the appliance to an
Approved Service Centre for
repair.
Try again by following
precisely the quantities of
the recipe.
Check your home electric
circuit.
Send the appliance to an
Approved Service Centre for
repair.
Send the appliance to an
Approved Service Centre for
repair.
Check and adjust the lid
position required by your
cooking program, refer to the
cooking programs table in
part 6 of this manual. Restart
your program once the lid
is correctly positioned. If
the issue remains, send the
appliance to an Approved
Service Center for repair.