Table of Contents
Advertisement
USB Mass Storage Device Confi guration
This feature allows the user to confi gure the USB Mass Storage Device set-
tings.
USB Mass Storage Device Reset Delay
This feature allows the user to set the time needed for the system to detect a
specifi c USB Mass Storage Device before it executes the next command. The
options are 10 Seconds, 20 Seconds, 30 Seconds, and 40 Seconds.
Emulation Type
This feature allows the user to confi gure the emulation type for the USB
Mass Storage Device. If set to Auto, any USB device less than 530MB will be
emulated as a fl oppy drive, and the remaining will be emulated as hard disk
drives. The Forced FDD option can be used to force a HDD-formatted drive
to boot as a fl oppy drive. The options are Auto, Floppy, Forced Floppy, HDD,
and CD ROM.
APCI Confi guration
This item allows the user to enable or disable the ACPI support for the operating
system.
Advanced ACPI Confi guration
Use this feature to confi gure advanced ACPI options. Select Yes if the operating
system supports ACPI. Select No if the operating system does not support
ACPI.
ACPI Version Features
Select Yes to allow the RSDP pointers to point to the Fixed System Description
Tables. Select No to deactivate this function. The options are Yes and No.
ACPI APIC Support
Select Enabled to allow the ACPI APIC Table Pointer to be included in the
RSDP pointer list. The options are Enabled and Disabled.
AMI OEMB Table
Select Enabled to allow the OEMB Table Pointer to be included in the R(x)SDT
pointer lists. The options are Enabled and Disabled.
Headless Mode
Select Enabled to activate the Headless Operation Mode through the ACPI
and allow the BIOS to boot up the system without using other I/O devices. The
options are Enabled and Disabled.
7-13
Chapter 7: BIOS
Advertisement
Table of Contents
