Drive Bay Installation/Removal; Accessing The Drive Bays - Supermicro 8025C-3R User Manual

S S
UPER ERVER 8025C-3R User's Manual
Figure 6-2. Removing System Cooling Fans
6-4

Drive Bay Installation/Removal

Accessing the Drive Bays

SAS Drives: You do not need to access the inside of the chassis or remove power
to replace or swap SAS drives. Proceed to the next step for instructions. Note: You
must use standard 1" high, SAS drives in the SuperServer 8025C-3R.
DVD-ROM: For installing/removing the DVD-ROM drive, you will need to gain ac-
cess to the inside of the server by removing the top cover of the chassis. Proceed
to the "DVD-ROM Installation" section later in this chapter for instructions.
6-4