Arrma GORGON SMART 2wd 550 Mega Manual page 22

Factory Defaults
Binding
ON
Bind socket
Insert the Bind Plug in the Connect a fully charged battery Power on the ESC. The Status
EXT RX & BIND Socket on pack to the ESC. LED will double flash repeatedly,
the ESC. indicating the ESC is in bind mode.
Center the ST TRIM dial on Power the transmitter on. The ESC Status LED will stop
the transmitter. flashing and remain solidly lit.
OFF
Bind socket
Remove the Bind Plug, then power off the ESC to save the settings. Power off the transmitter.
WWW.ARRMA-RC.COM
22