iRobot ABL-D1 Manual page 14

Removing Debris from Blower
Cover
Inspect blower cover for any lint or debris build-
up and wipe with a clean dry cloth to remove.
EN
10 For more information, visit global.irobot.com
Replacing the Bag
1
Lift up on the canister lid to open.
2
Pull up on the plastic card to remove the bag
from the canister.
Note: This will seal the bag so dust and
debris cannot escape.
3
Discard the used bag.
4
Install a new bag, sliding the plastic card into
the guide rails
5
Press down on the lid making sure it is
completely closed.
Note: To achieve optimal performance with
your robot and automatic dirt disposal, clean
and/or replace your robot's filter as needed.