Before First Use - Brabantia D10-2PLA Instruction Manual

DOUBLE SAFETY LOCKING SYSTEM
This system ensures user can only switch the Table Blender on when the lid has been
placed and locked on the unit in correct position. The Table Blender can only be switched
on, when the accessories have been fixed properly.

BEFORE FIRST USE

Clean the Table Blender and parts thoroughly before you use the appliance for the first
time.
1. Wash the measuring cup, lid and glass blender jug before first use.
2. Ensure that the Table Blender is off and not connected to the mains electrical supply
before assembling.
3. Insert the glass blender jug into the blade base and then adjust the glass blender jug
so that it is locked into the blade base.
4. Place the lid on top of the glass blender jug and press down.
5. Place the measuring cup in the centre of the lid and turn it anti-clockwise to lock it
into the lid.
This is normal that the cover lid is a bit tight to remove from glass jug (under dry
condition) because of the secure sealing system. The lid would be easy to manage after
blending any kind of liquid ingredient
CAUTION: The blades are very sharp. Wash with care. Never touch the blade
with your finger.
THE GLASS BLENDER JUG
1. Screw the blade assembly unit to the glass jug bottom until it is fixed properly.
2. Place the glass jug with blade assembly unit interface on the motor unit.
3. Place the lid on the jug and lock onto the handle.
4. Insert the measuring cup into the lid opening
5. Connect to main power supply.
6. Select the speed by turning the knob or press the program button.
IMPORTANT: Never operate the blender when it is empty or if it is filled with solids. Do
not let the appliance operate more than 3 minutes continuously. Let the appliance cool
down to room temperature before operating the appliance again.