Before First Use - Brabantia D10-1 Instruction Manual

DOUBLE SAFETY LOCKING SYSTEM
This system ensures user can only switch the appliance on when the lid has been placed
and locked on the unit in correct position. When the accessories have been fixed properly,
the unit can only be switched on. (i.e. Safety locking system is disabled at this moment)

BEFORE FIRST USE

Clean the units and parts thoroughly before you use the appliance for the first time.
The blades are very sharp. Wash with care.
HOW TO USE YOUR TABLE BLENDER
1. Screw the blade assembly unit to the glass jar bottom until it is fixed properly.
2. Place the glass jar with blade assembly unit interface on the motor unit.
3. Place the lid on the jar and lock onto the handle.
4. Insert the measuring cup into the lid opening
5. Connect to main power supply.
6. Select the speed by turning the knob.
Note: Do not let the appliance to operate more than 3 minutes continuously. Let the
appliance to cool down to room temperature before continue operating the appliance.
AFTER USING THE TABLE BLENDER
1. Disconnect the power from main supply.
2. Remove the lid (together with measuring cup) from the jar.
3. Remove the jar (together with blade assembly unit interface) from the motor part.
4. Detach the blade assembly unit interface from the bottom of the jar
Note: It is recommended to cut the food into smaller pieces before putting
them in the jar. Do not operate with large quantities of food at one time.
Never touch the blade with your finger.
5