Brabantia D10-2PLA Instruction Manual page 4

17. The Table Blender is equipped with a safety function. The unit can only be
switched on if the jug is placed properly on the base and it is locked into position.
If the Table Blender cannot be switched on, remove the plug from the mains
power supply and check the connection between jug and base. Make sure that the
glass jug is properly locked into position before attempting to start operation.
18. Only start operating the Table Blender once the lid is tightly placed onto the glass
blending jug and the measuring cup has been inserted into the lid.
19. Do not operate the Table Blender if the plug or power cord has been damaged, is
not working properly, has been dropped or has been exposed to water or other
liquid.
20. Check the Table Blender power cord regularly for damage. If the power cord is
damaged in any way, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid an electrical hazard.
21. Do not allow the power cord to hang over sharp table edges or come into contact
with hot surfaces.
22. Make sure that the Table Blender is switched off and remove the plug from the
mains electrical supply when it is not in use, before it is cleaned, before changing
accessories or moving parts and while it is being repaired.
23. Take care when handling the sharp blades, when emptying the glass jug and
during the cleaning process.
24. Avoid potential injury through misuse.
25. To prevent the risk of electrical shock, do not immerse the power cord, plug, or any
non-removable parts of this Table Blender in water or any other liquid.
26. The Table Blender base must not be submerged in water, as any contact with the
electrical parts will create a malfunction and/ or an electric shock. Do not use the
Table Blender with wet hands.
27. Do not use the Table Blender outdoors.
28. Always turn the dial to position 'O' to switch off the unit before removing the plug
from the wall socket.
29. To unplug the Table Blender, grasp the plug firmly and remove it from the mains
electrical supply. Do not pull on the cord or carry the unit by its cord.
30. Never use the Table Blender if it is damaged in any way.
31. Use only spare parts supplied by the manufacturer or an authorised service centre.
32. All repairs may only be carried out by an authorised service centre. Improper
repairs may place the user at risk.
33. When handing the Table Blender over to a third party, ensure that this instruction
manual is supplied with the Table Blender.