TP-Link Archer BE9300 User Manual page 9

Chapter 1
Status
Blinking
Top 10 LEDs
Solid
LED Exclamation Point
Blinking
LED Exclamation Point
Blinking
All LEDs
Off
Buttons
Three physical buttons are located on the front of the router
Press the WPS button, and immediately press the WPS button on your client device to
start the WPS process.
Press and hold this button for about 2 seconds to turn on or off the wireless function
of your router.
Press the LED button to turn on or off the LED of your router.
Establishing a WPS connection.
The router is disconnected from the internet.
The router is disconnected from the internet, and Wi-Fi is off.
Wi-Fi is off.
Power is off or the LED is turned off.
Get to Know About Your Router
Indication
5