TP-Link Archer BE9300 User Manual page 88

Chapter 15
Step 1 Set up PPTP VPN Server on Your Router
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
Note: Before you enable VPN
static IP address for router's WAN port and synchronize your
3. In the Client IP Address
leased to the devices by the PPTP VPN server.
4. Set the PPTP connection permission according to your needs.
• Select Allow Samba (Network Place) access
your local Samba server.
• Select Allow NetBIOS passthrough
Samba server using NetBIOS name.
• Select Allow Unencrypted connections
your VPN server.
5. Click SAVE.
6. Configure the PPTP VPN connection account for the remote device. You can create
up to 16 accounts.
1 ) Click Add.
VPN Server > PPTP, and tick the
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
field, enter the range of IP addresses (up to 10) that can be
Enable box of PPTP.
System Time with internet.
to allow your VPN device to access
to allow your VPN device to access your
to allow unencrypted connections to
VPN Server&Client
84