Coolant Temperature Gauge; (1) Hourmeter / Tachometer; Fuel Gauge - Kubota BX24D Operator's Manual

(1) Fuel gauge

BCoolant Temperature Gauge
To avoid personal injury:
A Do not remove radiator cap until coolant
temperature is well below its boiling point.
Then loosen cap slightly to the stop to relieve
any pressure before removing cap completely.
If the indicator reaches red zone,
1. Place the PTO clutch lever in "OFF" (DISENGAGE)
position.
2. Move the machine to the level surface, and apply the
parking brake.
3. Place the throttle lever in the engine idle position, and
let the engine run for a few minutes.
4. Check the Cooling System, after it has sufficient time
to cool down.
Check the following items:
1. Shortage or leakage of the coolant.
2. Foreign matter on the radiator net or dust and dirt
between the radiator fins.
3. Looseness of fan belt.
4. Blockage in the radiator tube.
(See "PERIODIC SERVICE" section.)
(A) "EMPTY"
(B) "FULL"
OPERATING THE TRACTOR

(1) Coolant temperature gauge

BHourmeter/Tachometer
When the key switch is "ON" and the engine is "OFF", the
indicator displays an hourmeter.
The hourmeter indicates in six digits the hours the tractor
has been used; the last digit indicates 1/10 of an hour.
When the key switch is "ON" and the engine is "ON", the
indicator displays a tachometer.
The tachometer indicates the engine revolution per
minute.

(1) Hourmeter / Tachometer

35