Beep Tone On/Off - Hyundai PB55 Instruction Manual

Parent unit
To activate the channel Memory function
· Press the menu – button twice, the current channel
memory flashes on the display.
· Press the – button (19) or the
to change the channel memory.
To deactivate the Channel Memory function,
Select Of
· Press the PTT – button (18) to confirm and return
to stand-by mode.
Adjusting the Baby Unit VOX sensitivity
The baby unit transmission is activated by the voice of the baby or by another sound in the
environment (VOX).
The VOX sensitivity can be adjusted by turning
the VOX sensitivity switch;
· Up = Highest sensitivity position
· Down = Lowest sensitivity position
Try the VOX sensitivity and exercise sufficiently before using the BM55.
Adjusting the Parent Unit Speaker volume
· Press the – button 19 in stand-mode to increase
the speaker volume. The volume level is displayed.
· Press the – button 20 to decrease the speaker volume.

Beep tone ON/Off

The Baby Unit can transmit automatically a 1 kHz beep tone every 30 seconds when it is in the
listening mode. This function can be used when you need
to be sure that the baby unit is operational at all time.
· Press the MENU – button (5) 3 times.
· Press the – button (7) to enable (ON) or the – button (4)
to disable (OF) this function.
Automatic monitor ON/Off
The Baby Unit can automatically open the microphone every 5 minutes and transmit the room
activity for 5 seconds.
· Press the MENU – button (5) 4 times.
· Press the – button (7) to enable (ON) or the – button(4)
to disable (OF) this function.
· Press the MENU – button (5) to confirm the selection.
– button (20)
EN - 22