Scope Of Use - BorMann 18711 Instructions Manual

Description of symbols
Pay attention to all the signs and symbols shown
in these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect
the environment by returning this
machine to a return point (if one is
available) when it reaches the end of its
life.
2. Layout (Fig. 1)
1. Locking button for ON / OFF switch
2. Additional Handle
3. ON/OFF switch
4. Speed control
5. Rear grip
6. Power cord
7. Polishing / sanding disk
8. Fleece plate
9. Foam plate

3. SCOPE OF USE

The machine is designed for polishing coated
surfaces and for sanding wood, iron, plastic and
similar materials using the appropriate abrasive
paper.
4. Starting up
4.1 Assembly
Important! Pull out the mains power plug before
starting the assembly work.
4.1.1 Mounting the auxiliary handle (Fig. 2-3)
Install the auxiliary handle with the Allen key.
4.2 Switch on/off (Fig.5)
To switch on intermittent operation mode:
Press the ON / OFF switch(3).
To switch off intermittent operation mode:
Release the ON / OFF switch(3).
Switching continuous operation on:
Press and hold the ON / OFF switch (3)down and
press the locking button(1).
To switch off continuous operation mode:
Press and then release the ON / OFF switch(3).
4.3 Speed Control (Fig. 5)
With the handwheel for speed preselection(4),
you can pre - select the rotational speed in steps.
4.4 Using as a polishing machine
When using waxing and polishing agents,
observe the instructions issued by their
manufacturer!
The Velcro fastener enables easy changing of the
24