Safety Regulations; Preliminary Procedures; During Operation - Stiga SP 316 Operator's Manual

Chain-saw for forest service
Hide thumbs Also See for SP 316:
Table of Contents

Advertisement

2. SAFETY REGULATIONS

2.1 TRAINING
Become familiar with the controls
and the proper use of the machine. Learn
how to stop the machine quickly. Failure
to follow the warnings and instructions
may result in fire and/or serious injury.
• Never allow children or persons unfamiliar with
these instructions to use the machine. Local
regulations may restrict the age of the operator.
• Never use the machine if the user is tired or
unwell, or has taken medicine, drugs, alcohol
or any substances which may slow their
reflexes and compromise their judgement.
• Bear in mind that the operator or user is
responsible for accidents or unexpected
events occurring to other people or their
property. It is the user's responsibility to
assess the potential risk of the area where
work is to be carried out and to take all the
necessary precautions to ensure his own
safety and that of others, particularly on slopes
or rough, slippery and unstable ground.
• If the machine is sold or lent to others,
make sure that the operator reads the user
instructions contained in this manual.
• It takes specific training to use the
machine for felling and delimbing.

2.2 PRELIMINARY PROCEDURES

Personal Protective Equipment (PPE)
• Always wear slim fitting protective clothing
with slash-proof protection, anti-vibration
gloves, helmet, protective goggles, half-
mask respirator, protective earplugs, cut
resistant safety boots with non–slip soles.
• Never wear scarves, shirts, necklaces,
bracelets, loose flowing clothing, laces or
ties or any hanging or flapping accessory
that could catch in the machine or in any
objects or materials in the work area.
• Tie your hair back if it is long.
Internal combustion engines: fuel
DANGER! Petrol and the fuel mixture are
highly flammable!
• Keep the petrol and fuel mixture in approved
fuel containers, in a safe place, away
from any naked lights or heat sources.
• Keep the fuel containers and storage
area free of sawdust, branches,
leaves, or excessive grease.
• Keep the containers out of
the reach of children.
• Do not smoke when preparing the
mixture, when filling or topping up with
fuel or when handling the fuel.
• Use a funnel to top up with
fuel only in the open air.
• Do not inhale fuel fumes.
• Never remove the tank cap or add fuel whilst
the engine is running or when the engine is hot.
• Open the fuel tank slowly to allow the
pressure inside to decrease gradually.
• Do not approach the tank opening with
a naked flame to check its contents.
• If you have spilt some fuel, do not attempt to
start the engine but move the machine away
from the area of spillage and avoid creating
any source of ignition until the fuel has
evaporated and fuel vapours have dissipated.
• Immediately clean up all traces of fuel
spilt on the machine or on the ground.
• Replace caps of all fuel tanks
and containers securely.
• Never start the machine in the same
place in which you refilled it with fuel; the
engine must be started in an area at least
3 metres from where you refuelled.
• If fuel is spilt on clothing, change
clothing before starting the engine.

2.3 DURING OPERATION

Work Area
• Do not operate the engine in a confined space
where dangerous carbon monoxide fumes
can develop. All starting operations must be
carried out in an open or well ventilated area.
• When starting up the machine, do not direct
the silencer and therefore the exhaust
fumes towards flammable materials.
• Do not use the machine in environments at
risk of explosion, in the presence of flammable
liquids, gas or powder. Electrical contacts
and mechanical friction can generate sparks
that can ignite the powder or vapours.
• Work only in daylight or with good artificial
light in good visibility conditions.
• Keep persons, children and animals away
from the working area. Ask another adult
to keep the children under supervision.
• Check that there is nobody within at least 15
metres of the machine's range of operation.
• Where possible, avoid working on
wet, slippery ground or in any case on
uneven or steep ground that does not
guarantee stability for the operator;
• Pay careful attention to uneven ground
hills, dips, slopes, hidden hazards and
obstacles that could limit visibility.
• Be very careful near ravines,
ditches or embankments.
EN - 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp 316 c

Table of Contents