Cleaning The Water Supply Inlet Net; Cleaning The Discharge Pump Net - LG TROMM F2996NCZ Instruction Manual

Cleaning the Water Supply Inlet
Net
If the pressure of water into the detergent box is too low,
or the net is clogged by wastes, the washer with time
displays will indicate
will display warning messages.
After closing the faucet, separate the water supply
1
hose connected to the rear of the washer.
After taking out the net with your hands or clipper,
2
use a toothbrush to remove wastes from it.
NOTE
• To prevent wastes from clogging the water supply
inlet net, periodically clean it. If the net has alien
substances such as rusts, sands or stones, water
supply will be interfered.
46
and the washer with an LCD

Cleaning the Discharge Pump Net

If the net is clogged by wastes, the washer with time
displays will indicate
will display warning messages.
Open the service cover at the bottom of the washer
1
(Some models have drawers instead).
• If there is a handle to the cover, while pressing it
down, pull it forward.
• If there is no handle, then pull it forward while
pressing it down by using a coin on the hole at
the cover top.
Remove the residual water removal hose and open
2
the cap to remove water from the inside of the
washer.
Residual water
removal hose
Hose cap
Turn the pump cap to remove the net and clean it.
3
and the washer with an LCD
Pump cap