Baseframe; Replacing Column Elements; Replacing The Glass Plate, Load Cells And Weight Module - Seca 2841300009 Service Manual

Replacement instructions
seca 284/ 285

1 Baseframe

Please be sure to observe the sequence listed below when removing/ fitting the parts!

1.1 Replacing column elements

• Remove the insert scale.
• Start with the uppermost column element.
• First remove the nut (A) from the uppermost column element, remove the column, next
remove the long nut (B) on the 2
column element.
• Only then detach the connection between column and frame by unscrewing the 3 hex
socket-head screws (C).
A
Figure 1: Replacing the column elements

1.2 Replacing the glass plate, load cells and weight module

• To replace the glass plate (G, Fig.3), lever the four cover plates (I) off the bottom side
of the frame and release the four screws (S) underneath.
Figure 2: Replacing the glass plate and load cell screw connection
13.09.2010 /KSP
nd
column element and proceed likewise to the 3
B
C
I
S
4
rd
30-34-00-811