34923T-002 Terminal Block For One-Wire Mode - Keysight Technologies 34922A User Manual

Low Frequency Multiplexer Modules

34923T-002 Terminal Block for One-Wire Mode

This terminal block with screw-type connections is labeled with the model
number and the abbreviated module name. In addition, space is available on the
label for you to write the slot number
The 34980A Product Reference CD (shipped with the instrument) contains a
34923T (1-wire mode) Wiring Log for you to document your wiring configuration
for this module. You can open the wiring log file in Microsoft® Excel® or Adobe®
Acrobat® format.
38
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
All modules that connect to the internal DMM are interlock
protected. This means that when an installed module is
exposed
(no terminal block or cable is connected), the Analog Bus
relays are open and disconnected from the Analog Buses.
See "Safety Interlock" on page 11 for further information.
If you are using an Keysight terminal block to connect your
DUT to this module be sure to use the 34923T-002 terminal
block that corresponds to the 1-wire configuration mode.
An error will not be generated if you have installed a
terminal block that doesn't match the present module
configuration.
Keysight 34921A-34925A Low Frequency Multiplexer Modules User's Guide
34923A 40/80-Channel Reed Multiplexer