General Control - Sharp DK-CL3P Operation Manual

General control

■ To turn the power on
Press the ON/STAND-BY button to turn the power on.
The first time power is supplied to the unit, the clock will be
blinking on the display. Please set the time and date
(refer page 11).
After use:
Press and hold the ON/STAND-BY button to enter the power
stand-by mode.
■ Display brightness control (DIMMER)
Press the SNOOZE/DIMMER button to adjust the brightness of
LCD display.
Notes:
●
Setting dimmer to display in the brightest mode during battery
operation will affect battery life.
●
During battery operation in standby mode, the brightness of
MEMORY
the display will automatically go to the lowest mode (dim OFF)
after 5 seconds.
■ Volume auto set in
If you turn off and on the main unit with the volume set to 17 or
higher, the volume starts at 16.
■ Volume control
Press the VOLUME (+ or –) button
to increase or decrease the volume.
Volume indicator will be blinking
when volume reaches maximum
and minimum level.
Dimmer 1 (Display is dim)
Dimmer 2 (Display gets dimmer)
Dimmer off (Display is bright)
MON
DK-CL3P
ENGLISH
E-10