Troubleshooting Chart; Radio - Sharp DK-CL3P Operation Manual

■ Listening to the audio/video sounds from
portable audio player, computer etc.
1
Use the auxiliary cable to connect the portable audio
player, computer etc. to the AUDIO IN jack.
When using video equipment, connect the audio output to
this unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNCTION button to select AUX function.
4
Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the
television and do not make any auxilary playback while listening
to the iPod or iPhone.

Troubleshooting chart

Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorized SHARP dealer or service center.
■ General
Symptom
●
The clock is not set to the
correct time.
●
When a button is
pressed, the unit does
not respond.
●
No sound is heard.
■ Tuner
Symptom
●
The radio makes unusual
noises continuously.
Possible cause
●
Did a power failure occur?
Reset the clock. (Refer to
page 11)
●
Set the unit to the power
stand-by mode and then turn
it back on.
●
If the unit still malfunctions,
reset it.
(Refer to page 19)
●
Is the volume level set to "0"?
Possible cause
●
Is the unit placed near the
TV or computer?
●
Is the FM antenna placed
properly? Move the antenna
away from the AC/DC
adaptor if it is located
nearby.
DK-CL3P
ENGLISH
E-18