Alarm Operation; Radio - Sharp DK-CL3P Operation Manual

Alarm operation

■ Alarm
The unit turns on and play desired source (iPod, iPhone or
TUNER) or Buzzer sound for 1 hour alarm cycle.
Before setting the alarm:
1 Check that the clock is set to the correct time. (refer page 11)
If it is not set, you cannot use the alarm function.
2 For iPod playback: Insert iPod or iPhone to the unit. (refer
page 13)
3 For TUNER: Set preset memory. (refer page 15)
Setting the alarms
1
In standby mode, press and hold the ALARM button until the
alarm time and alarm icon blinking.
SUN MON
TUE
2
Press the or button to adjust the hour and press the
ALARM button.
SUN MON
TUE
Press the or button once to advance the time by
1 hour. Hold it down to advance continuously. "AM" or "PM"
indicator will interchange after each 12 hour cyclic.
WED THU FRI SAT
WED THU FRI SAT
3
Press the or button to adjust the minutes and then
press the ALARM button.
SUN MON
TUE
Press the or button once to advance the time by
1 minute. Hold it down to change the time in 5 minutes interval.
4
Press the or button to select the day for the alarm
and then press alarm button.
SUN MON TUE
Everyday: MON - SUN (Alarm activate daily)
Weekday: MON - FRI (Alarm activate from Monday to Friday
only)
Weekend: SAT - SUN (Alarm activate from Saturday to
Sunday only)
5
Press the or button to select the wake up
source and then press the ALARM button.
MON
TUE
Wake up source selection:
BUZZER

RADIO

Alarm icon " " will light up to indicate alarm setting is complete.
WED THU FRI SAT
WED
THU FRI SAT
WED THU FRI
iPod
DK-CL3P
ENGLISH
E-16