Advertisement
This appliance is only applicable for household usage. Please
operate the unit according to the operation manual, and do not
misuse the appliance for purposes other than its actual function.
If the power cord is damaged, the appliance must be brought
to appointed SHARP service center for re
prevent any hazards occurring.
• Do not damage or alter the power cord arbitrarily. It should not be
twisted, extended, bundled up or placed near hot places. Do not place
heavy objects on the power cord or place the cord in the gap between
objects.
• Do not let the power cord hang over the edge of table or countertop.
Do not place the power cord on hot surfaces.
• If the power cord or power plug is damaged or failed to function normally,
(e.g. being expanded, deformed, changed in color, part of the power cord
is hotter than usual, power cord is loosened in the socket, or power is on
and off from time to time), please stop using it. Send it to a SHARP service
center for repair services.
Use a wall grounded socket individually (>10A, AC 220-240V ～
50/60Hz); please ensure that the output voltage of the grounded
socket matches the appliance.
• Using socket with low rate current or sharing the socket with other
appliances may cause partial overheating and may lead to fire hazard
or electrical shock.
• A voltage stabilizer can be used to avoid damages.
• Please ensure the power plug is fully secured into the socket before
switching on the power.
When the appliance is not in use or undergoing maintenance, please
turn off the power supply and remove the plug from socket.
• Please hold onto the plug firmly when removing it from power socket
and prohibit pulling the power cord.
• Do not touch the power plug with wet hands to avoid electrical shock.
• If there is dust or dirt on the power plug, please wipe them away with a dry
cloth, otherwise it may lead to fire hazard. Never use a wet cloth or water
to clean the power plug.
pair or replacement to
-4-
Advertisement
