Table of Contents
Advertisement
DISC/USB/CARD OPERATION
Select the track or file for playback in MP3 format
Press the AMS button repeatedly to select one of the following 3 search modes:
NUM SCH (Searching by track or file serial number)
DIR SCH (Searching by folder serial number)
FILE SCH (Searching by track or file name)
Searching by track or file serial number:
a) In playback of files with MP3 format, press the AMS button once to access the track or file number
searching mode which allow you to quickly find a specific MP3 track or file by its serial number, and the
"NUM SCH" and "NUM ***" will appear on the LCD display in sequence, and the first symbol "*" will blink.
b) Rotate the VOL knob to select the serial number of your favorite file with high speed.
c) Finally press the SEL button to confirm and play the selected file.
Searching by folder serial number:
The folder search mode allows you to quickly find an MP3 track or file under a specific group folder.
a) In playback of files with MP3 format, press the AMS button twice, the "DIR SCH" will be shown on the
LCD display.
b) Rotate the VOL knob to select a desired folder.If there are no root Folder in the MP3 disc,
USB or SD card, the LCD will display "ROOT")
c) Press the SEL button to play the first track or file of the selected folder.
Searching by track or file name:
This track or file name search function requires only the first few character as search keyword, it will
allow you to quickly find an MP3 title by its name.
a) Press the AMS button three times, the "FILE SCH" and "*------" will be shown on the LCD display in
sequence, and the first character "*" will blink.
b) Rotate the VOL knob to change the first character (*). The character will be changed from "A" to "Z",
"0" to "9" and "_", "-", ",+","space". Press the SEL button to confirm the character entered and the next
character will blink for setting. Press the AMS button to delete the incorrect character.
c) When matched files was found, press the SEL button to start play the searched file.
If the file was not found, "NO FOUND" message will be visible on the display.
AUXILIARY INPUT OPERATION
This car radio is equipped an external auxiliary input jack (3.5mm) on the front panel, and a pair audio
auxiliary input RCA connector at the rear cabinet of the head unit, it is compatible with audio output
from an MP3 music player.
If you have plugged such a player into the AUX IN jack with a audio cable. Or connect other audio
device to the audio auxiliary input RCA connector on the rear cabinet of the head unit with a audio input
cable. Press the SRC button to switch to the AUX input mode, then you can listen to music from external
devices.
Note:
Do not use the AUX IN jack and the audio auxiliary input RCA connector at the same time,
otherwise, it will cause the audio auxiliary function unusable.
9
Advertisement
Table of Contents
