Removing A Memory Module - Sony VAIO Digital Studio PCV-RX260DS Reference Manual

Removing, Installing, and Replacing Components

Removing a Memory Module

You may need to remove a memory module if you change the memory
configuration or replace a bad module.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove the side cover (see
2
Remove the power supply (see
page 41).
3
Locate the memory module you wish to remove.
The memory modules are located beneath the power supply. You
do not need to remove the power supply to reach the memory
modules.
"Removing the Side Cover"
"Removing the Power Supply"
33
on page 22).
on
KY0073.VSD