Table of Contents
Advertisement
Removing a Memory Module
1.
Turn off the computer and all peripheral devices.
2.
Disconnect the power cord and all cables from the computer, and remove the battery.
Note:
The interior of the computer becomes extremely hot during operation. Wait at least one hour for the computer to
cool down before you remove the screws.
3.
Use an appropriate screwdriver to loosen and remove the screw that fastens the memory module cover plate on
the bottom of the computer.
Caution:
To avoid damaging the computer, do not remove or loosen any other screws.
Removing Cover Plate
4.
Remove the memory module cover plate.
5.
Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity,
then remove the memory module, pulling it out in the direction of the arrows.
Removing a Memory Module
6.
Close the cover panel and replace the fastening screw.
Page 105
Advertisement
Table of Contents
Troubleshooting
