Accessing The Bios Setup Utility - Sony VAIO Digital Studio PCV-RX260DS Reference Manual

16
VAIO Digital Studio Reference Manual

Accessing the BIOS Setup Utility

You must access the BIOS Setup Utility to make changes to the BIOS
settings (see "CMOS Setup Options"
settings).
!
Before rebooting the system, save any open files and exit the Microsoft
®
Windows operating system.
1
Reboot the system.
2
When the Sony logo appears, press F3. The following message
appears at the bottom of the screen.
Press <F2> for setup.
3
Press F2.
Each menu presents options for modifying the system configuration.
Use the left and right arrow keys to select a menu from the menu bar.
Use the up and down arrow keys to select items within a menu. Once
an item is highlighted, use the plus/minus (+/-) keys to modify a
setting.
If an item has a triangle ( ) to its left, this indicates that a sub-menu of
options is available. Press ENTER to access a sub-menu. If a sub-
menu contains items with a triangle, there is another layer of options
from which to select.
4
Once you select an option, press ESC to back out of each menu until
you reach the top level, where the menu bar appears.
5
To exit the BIOS setup utility, press ESC from any top-level screen and
follow the prompts.
on page 69 for information on BIOS
®