Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove the system cover (see
page
22).
2
Locate the memory module you wish to remove.
DIMM 1
DIMM 2
(empty)
If the memory module you wish to remove is DIMM #2, skip steps 3 to 5. Otherwise,
continue.
3
Push out the handle on each side of the memory module to eject the
module from its socket.
Removing, Installing, and Replacing Components
"Removing the System Cover" on
Push out
Handles
35
KY0073.VSD
KY0042.VSD