Table of Contents
Advertisement
is displayed on the screen.
"Input Signal Out of
Range"is displayed on
screen.
The monitor does not
enter into a low-power
sleep state.
"OSD Lockout" is
displayed
"Power Button
Lockout" is displayed.
Video resolution and/or refresh rate are set
higher than what the monitor supports.
The monitor's power saving control is disabled.
The monitor's OSD lockout function is
enabled.
The monitor's Power Button Lockout feature
is enabled.
video signal cable between
the computer and monitor. Be
sure that the computer power
is off while connecting the
video cable.
Change the settings to a
supported setting.
Open the OSD menu and
select Power, select Auto-
Sleep Mode, and then set
auto-sleep to On.
Press and hold the Left button
for 10 seconds to disable the
OSD Lockout function.
Press and hold the Power
button for 10 seconds to
unlock the power button
function.
19
Advertisement
Table of Contents
