Loading The Racks; Upper Rack; Lower Rack - Whirlpool WFC 3C42 P Daily Reference Manual

LOADING THE RACKS

UPPER RACK

(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: high position to place bulky
crockery in the lower basket and low position to make the most of the tip-
up supports by creating more space upwards and avoid collision with the
items loaded into lower rack.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers A at the sides of the rack and move the
basket downwards.
We strongly recommend that you do not ad-
just the height of the rack when it is loaded.
NEVER raise or lower the basket on one side
only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or
unfold to optimize the arrangement
of crockery inside the rack.
Wine glasses can be placed safely in
the foldable flaps by inserting the
stem of each glass into the corre-
sponding slots.
Depending on the model:
– to unfold the flaps there is needed
to slide it up and rotate or release it
from the snaps and pull it down.
– to fold the flaps there is needed
to rotate it and slide flaps down or pull it up and attach flaps to the
snaps.
Load delicate and light dishes:
glasses, cups, saucers, low sal-
ad bowls.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids
should ideally be placed at the sides to avoid interferences with the
spray arm. The lower rack has tip-up supports which can be used in
a vertical position when arranging plates or in a horizontal position
(lower) to load pans and salad bowls easily.
(loading example for the lower rack)
CUTLERY BASKET
It is fitted with top grids for improved cutlery arrangement. It must only
be positioned at the front of the lower rack.
Knives and other utensils with sharp edges must be placed in the cut-
lery basket with the points facing downwards or they must be posi-
tioned horizontally in the tip-up compartments on the upper rack.
POWER CLEAN®
Power Clean® uses the special water jets
in the rear of cavity to wash more inten-
sively the high dirty items. The lower
rack has a Space Zone, a special pull-out
support in the rear of the rack that can
be used to support frying pans or baking
pans in upright position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean® component please
activate the POWER CLEAN® on the
panel.
How to use Power Clean®:
1. Adjust the Power Clean® area G
folding down the rear plate hold-
ers to load pots.
2. Load pots and casseroles inclined
vertically in Power Clean® area.
Pots have to be inclined towards
the power water jets.
EN
5