Whirlpool WFC 3C33 F X Quick Manual

This is an Adobe® Illustrator® File that was
saved without PDF Content.
Quick Guide
To Place or open this le in other
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance, please
applications, it should be re-saved from
register your appliance on: www.whirlpool.eu/register
Adobe Illustrator with the "Create PDF
Before using the appliance carefully read the Safety Instruction.
Compatible File" option turned on. This
CONTROL PANEL
option is in the Illustrator Native Format
1. On-Off/Reset button with indicator light
Options dialog box, which appears when
2. Program selection button with indica-
tor light
saving an Adobe Illustrator le using the
3. Multizone button with indicator light
/ Key lock Save As command.
4. Eco program indicator light
5. Key lock indicator light
6. Display
7. Program number and remaining time
indicator
This is an Adobe® Illustrator® File that was
FIRST TIME USE
saved without PDF Content.
FILLING THE SALT RESERVOIR
To Place or open this le in other
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine's functional components.
applications, it should be re-saved from
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
Adobe Illustrator with the "Create PDF
The salt reservoir is located in the lower part of the dishwasher and must be
filled when the SALT REFILL indicator light
Compatible File" option turned on. This
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise). option is in the Illustrator Native Format
2. Position the funnel (see figure) and fill the salt reservoir
Options dialog box, which appears when
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
saving an Adobe Illustrator le using the
3. Only the first time you do this: fill the salt reservoir
with water.
Save As command.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
This is an Adobe® Illustrator® File that was
FILLING THE RINSE AID DISPENSER
saved without PDF Content.
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be filled when the RINSE AID
To Place or open this le in other
REFILL indicator light
D
NEVER pour the rinse aid directly into the
applications, it should be re-saved from
C
appliance tub.
Adobe Illustrator with the "Create PDF
A
PROGRAMS TABLE Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
Program
saving an Adobe Illustrator le using the
Eco 50°- Program is suitable to clean normally soiled tableware,
Save As command.
that for this use, it is the most efficient programme in terms of its
1.
combined energy and water consumption, and that it is used to
assess compliance with the EU Ecodesign legislation.
6 Sense® 50°- 60°- For normally soiled dishes with dried food
th
2.
residues. Senses the level of soiling on the dishes and adjusts the
program accordingly.
Intensive 65° - Program recommended for heavily soiled crockery,
3.
especially suitable for pans and saucepans.
Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that
4.
ensures optimal cleaning and drying performance in shorter time.
Crystals 45° - Program for delicate items, which are more sensitive
5.
to high temperatures, for example glasses and cups.
Rapid 30' 50° - Program to be used for half load of lightly-soiled
6.
dishes with no dried food residues. Without drying.
Silent 50° - Suitable for night-time operation of the appliance.
7.
With the lowest noise.
Prewash - Use to refresh crockery planned to be washed later. No
8.
detergent to be used with this program.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
8. Tablet (Tab) indica-
tor light
9. Closed water tap
indicator light
10. Rinse Aid refill
indicator light
11. Salt refill indicator light
12. Sani Rinse button with indicator light / Tablet (Tab)
13. Delay button with indicator light
14. Start/Pause button with indicator light / Drain out
in the control panel is lit.
in the control panel is lit.
Programs description
PLEASE SCAN THE QR CODE ON YOUR
APPLIANCE IN ORDER TO HAVE MORE
DETAILED INFORMATION
1 2 3 4
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser D only. Place the amount of detergent for
pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning efficiency.
This system regenerates itself with salt, therefore it is required to refill
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in final rinse and finishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
Available
options
- -
- -
This is an Adobe® Illustrator® File
saved without PDF Content.
To Place or open this le in other
applications, it should be re-save
Adobe Illustrator with the "Create
Compatible File" option turned o
option is in the Illustrator Native
Options dialog box, which appea
saving an Adobe Illustrator le us
Save As command.
6 8 9 10
5 7 11 12
This is an Adobe® Illustrator® File
saved without PDF Content.
To Place or open this le in other
applications, it should be re-save
Adobe Illustrator with the "Create
Compatible File" option turned o
option is in the Illustrator Native
Options dialog box, which appea
saving an Adobe Illustrator le us
Save As command.
This is an Adobe® Illustrator® File
saved without PDF Content.
To Place or open this le in other
applications, it should be re-save
Adobe Illustrator with the "Create
Compatible File" option turned o
option is in the Illustrator Native
Duration Water
of wash consump-
Options dialog box, which appea
program tion
*)
(h:min) (litres/cycle)
**)
saving an Adobe Illustrator le us
Save As command.
3:10 9.5
1:25 - 3:00 7.0 - 14.0
2:50 16.0
1:25 11.5
1:40 11.5
0:30 9.0
3:30 15.0
0:12 4.5
EN
13 14
Energy
consump-
tion
(kWh/cycle)
0.85
0.90 - 1.40
1.60
1.10
1.20
0.50
1.15
0.01
1