Table of Contents
Advertisement
Available languages
Available languages
EN
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.
MULTIZONE - If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and detergent. By de-
fault the appliance washes dishes in all racks.
TURBO - This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying performance levels.
NaturalDry is a convection drying system which automatically opens the
door during/after drying phase to ensure exceptional drying performance
every day. Door opens at the temperature that is safe to your kitchen furni-
ture, thus door will not be opened when the option of TURBO is on.
-
DELAY
The start time of the program may be delayed for a period of
time between 1 and 12 hours.
The DELAY function cannot be set once a wash cycle has been started.
LOADING THE RACKS
CUTLERY RACK
(loading example for the
cutlery rack)
The third rack was desi-
gned to house the cutlery.
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
1
2
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
TROUBLESHOOTING
In case your dishwasher doesn't work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS
POSSIBLE CAUSES
No water in the water supply or the tap is
The dishwasher does
closed.
not fill the water.
Display shows: H,
The inlet hose is bent.
6 and On/Off LED is
blinking rapidly
The sieve in the water inlet hose is clogged;
it is necessary to clean it
Dishwasher finishes
Drain hose positioned too low or siphoning
the cycle prematurely.
into home sewage system.
Display shows: 15 and On/
Off LED is blinking rapidly
Air in water supply.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identi-
fier that can be used to consult the https://eprel.ec.europa.eu database portal.
2
UPPER RACK
flaps with
adjustable
(loading example for the
upper rack)
Load delicate and light
dishes: glasses, cups, sa-
ucers, low salad bowls.
3
B
A
C
Please scan the QR code on your product in order to have more detailed information.
POWER CLEAN - Thanks to the additional power jets this option provides
a more intensive and powerful wash in the lower rack, in the specific area.
This option is recommended for washing pots and casseroles.
OPERATION INDICATOR - A LED light projected on the floor indicates
that the dishwasher is working.
One of the following operating modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds, stays off during
the cycle and flashes at the end of the cycle.
c) The light stays on during the cycle and flashes at the end of the cycle
(default mode).
TABLET (Tab)- If you use powder or liquid detergent, this option should be off.
LOWER RACK
Foldable
position
POWER CLEAN
Power Clean uses the special water jets in the rear of cavity to wash more inten-
sively the high dirty items. The lower rack has a Space Zone, a special pull-out
support in the rear of the rack that can be used to support frying pans or baking
pans in upright position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean®
component please activate the POWER CLEAN on the panel.
More information in the Daily Reference Guide on the website.
CLEANING THE SPRAY ARMS
4
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure there is water in the water supply or the tap running.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwa-
sher and reboot.
After having carried out the verification and cleaning, turn off and turn on the
dishwasher and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check
for siphoning into home sewage system, install air admittance valve if necessary.
Check water supply for leaks or other issues letting air inside.
Quick Guide
CAPACITY: 14 standard place-settings
For pots, lids, plates, salad bowls, cutlery etc.
Large plates przand lids should ideally be
placed at the sides to avoid interferences with
the
sprayarm.
The lower rack has tip-up supports which can
be used in a vertical position when arranging
plates or in a horizontal position (lower) to load
pans and salad bowls easily.
(loading example for the lower rack)
The lower spray arm may
be removed by pulling it
upwards.
:
400011685890
06/2023 dk - Xerox Fabriano
IEC 436
Advertisement
Table of Contents
