Drolet DB03105 Installation And Operation Manual page 105

Report prepared for: Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on 12/1/2017 8:00:00 AM
Authorized - Authorized by Intertek. All inquiries regarding change to Listed products must be
presented to Intertek in writing for consideration and approval.
C.S.A. - Canadian Standards Association.
Certified - Equipment or material included in a list published by a nationally recognized certification
agency that conducts periodic inspections of production of Listed equipment or materials and
whose listing stated either that the equipment or material meets recognized standards or has been
tested and found suitable for use in a specified manner.
Construction Details - For specific construction details, reference should be made to the following
photographs and descriptions. All dimensions are approximate unless specified as exact or within a
tolerance. In addition to the specific construction details described in this Report, the following
general requirements may also apply as applicable.
Discrepancy - A difference between this Report and a product described in this Report. This will
result in the filing of a Variance Report on which a management level decision for the corrective
action will be based.
Installation, Operating and Safety Instructions - Instructions for installation and use of this
product are provided by the Manufacturer as required by the standard.
Listed - Equipment or materials included in a list published by a nationally recognized certification
agency that conducts periodic inspections of production of listed equipment of materials, and
whose listing states either that the equipment or materials meets nationally recognized standards,
or has been tested and found suitable for use in a specified manner.
Listed Component - Identifies any product covered under the Listing or Certification service of an
NRTL (US) or a CO (Canada).
Markings - The Intertek Certification Mark shall be visible after installation. Other markings may be
required as identified in this Report. If evaluated to a Canadian standard, the products may be
required to have markings in both French and English. If so, it is the responsibility of the Applicant
to determine any such requirement and provide bilingual markings, where applicable, in accordance
with the Provincial Regulatory Authorities.
N.F.P.A. - National Fire Protection Association.
Production Test Requirements - When applicable, the Manufacturer shall have the necessary
test facilities to carry out production tests on the Listed product.
Products - The product as described under "Authorization to Mark" is eligible to carry the Intertek
Certification Mark.
Recognized Component - Identifies any component, part or sub-assembly, covered under the
recognition service of an NRTL (US) or a CO (Canada), and intended for use in Intertek Listed,
Intertek Classified, or Intertek Recognized products.
Records - Records of the use of the Intertek Certification Mark must be maintained by the
Applicant and must be available for review during normal business hours.
Stove Builder International Inc. | 35697 | Rev: Nov 30 2017 11:01AM | Uncontrolled Copy Page 219 of 245