Related Manuals for Huskie Tools 7M PRO REC-MK754M
Summary of Contents for Huskie Tools 7M PRO REC-MK754M
- Page 1 OPERATOR MANUAL FOR MODEL: REC-MK754M Gear-Driven Cable Cutting Tool WARNING To reduce the risk of injury, user must read and understand manual completely before first using this product and save this manual for future use.
- Page 2 THIS PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
MODEL: REC-MK754M THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the finest cable connecting and cutting tools and cable-related products to the transmission and distribution markets. Huskie Tools products will represent state-of-the-art tools and be dependable and safe. -
Page 4: Description
5. 18V-5.0Ah Li-Ion Battery Weight ........... 8.3 lbs. (3.8 kg) 6. Advance Trigger 7. Move able Cutting Blade Cutting Capacities ACSR ............1590 MCM Aluminum ..........1500 MCM Copper ............ 750 MCM REC-MK754M - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 5: Safety Symbols
MODEL: REC-MK754M SAFETY SYMBOLS You will see this symbol throughout this manual. This purpose of this symbol is to call your attention to hazards and/or unsafe practices that have the Read all instructions and potential to cause injury or property damage. The safety information detailed severity of each hazard is further explained in detail in this operator manual prior... -
Page 6: Safety Information
• Maintain tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tools operation. If damaged, have the tool repaired before use. REC-MK754M - OPERATOR MANUAL Copyright © Huskie Tools 2019... - Page 7 • Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. • To reduce the risk of injury, charge only Huskie Tools Battery Pack model BP-185. Other types of batteries may burst causing personal injury and damage.
-
Page 8: Operating Instructions
5. Provided that maintenance of the tool is carried out regularly, the tool should provide many years of service. 6. Should you experience any difficulty with the operation and maintenance of this tool, contact Huskie’s technical support department at 1-800-860-6170. REC-MK754M - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 9: Troubleshooting Guide
MODEL: REC-MK754M TROUBLESHOOTING GUIDE Before You Begin 1. Make sure that the battery is charged. Recheck the battery after several minutes to make sure the battery is holding its charge. 2. Use a nonflammable contact cleaner or pencil eraser to clean the electrical contacts on the battery and tool. -
Page 10: Maintenance Notes
MODEL: REC-MK754M MAINTENANCE NOTES REC-MK754M - OPERATOR MANUAL Copyright © Huskie Tools 2019... -
Page 11: Warranty Information
Huskie. These remedies are exclusive, and the total liability of Huskie Tools, LLC whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the tool. In no event, shall Huskie Tools, LLC be liable for consequential, incidental or special damages. - Page 12 Glendale Heights, IL 60139 Phone 800-860-6170 Fax 800-345-3767 www.HuskieTools.com Huskie Tools reserves the right to change this information without further notice and holds no liability for printing errors in this content. Copyright © 2019 Huskie Tools, Inc. All Rights Reserved.