Hob - Hints And Tips - Zanussi ZCI66280BA User Manual

fan. To start the fan again with fan speed 1
touch .
To activate automatic operation of the
function, deactivate the hob and activate
it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2
minutes after deactivating the hob.
6.14 Power management function
• All cooking zones are connected. See the
illustration.
• The hob and both ovens are connected to
one phase.
• The phase has a maximum electricity
load.
• The function divides the power in the
appliance. The oven is more important
than the hob.

7. HOB - HINTS AND TIPS

WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones a strong
electro-magnetic field creates the heat in
the cookware very quickly.
Use the induction cooking zones with
suitable cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
16 ENGLISH
• The function activates when the total
electricity load in the appliance is
exceeded.
• The function reduces the power of other
cooking zones to prevent a circuit
overload.
• The heat setting display of the reduced
zones changes between two levels.
• Power limit for all zones is the difference
between maximum power allowed for
appliance and the power consumption of
ovens.
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
• recommended: aluminium, copper
• not recommended:stainless steel, cast
iron, glass
Cookware is suitable for an induction hob
if:
• water boils very quickly on a zone set to
the highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be as
thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
Cookware dimensions