Zanussi ZCI66280BA User Manual page 28

Hide thumbs Also See for ZCI66280BA:
Table of Contents

Advertisement

12.3 Cleaning the top oven
1. Clean the oven floor with warm water and
washing-up liquid, then dry it.
2. Set the oven temperature to 250 °C and
let the oven operate for 1 hour.
3. When the appliance is cool, clean it with a
soft and moist sponge.
12.4 Cleaning the main oven
1. Clean the oven floor with warm water and
washing-up liquid, then dry it.
2. Set the oven temperature to 250 °C and
let the oven operate for 1 hour.
3. When the appliance is cool, clean it with a
soft and moist sponge.
12.5 Removing the shelf supports
To clean the oven, remove the shelf supports.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
1
Install the shelf supports in the opposite
sequence.
CAUTION!
Make sure that the longer fixing wire is in
the front. The ends of the two wires must
point to the rear. Incorrect installation can
cause damage to the enamel.
28
ENGLISH
2
12.6 Removing and cleaning the
door glasses - top oven
The door glass in your product can be
different in type and shape from the
examples you see in the image. The
number of glasses can also be different.
1. Open the door.
2. Hold the door trim on the top edge of the
door at the two sides and push inwards to
release the clip seal.
1
3. Pull the door trim to the front to remove it.
4. Remove the glass panels.
To install the panels, do the same steps in
reverse.
12.7 Removing and cleaning the
door glasses - main oven
The door glass in your product can be
different in type and shape from the
example you see in the image. The
number of glasses can also be different.
1. Push the door trim at one side to remove
it.
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zci66280waZci66280xa

Table of Contents