Transport And Packaging - BOMANN SBS 7310 IX Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

• Cleaning and user maintenance
they are older 8 years and supervised.
• Do not try to repair the appliance on your own. Always contact an au-
thorized technician. To avoid the exposure to danger, always have
faulty cable be replaced only by the manufacturer, by our customer
service or by qualified person and with a cable of the same type.
• Use the provided collection points of electrical equipment for the dis-
posal of the appliance.
Coolant
Coolant
Coolant
Coolant
WARNING
WAR
NING: : : :
WAR
WAR
NING
NING
The coolant circuit of this appliance contains the
refrigerant Isobutane (R600a), a natural gas that is
flammable and of high environmental compatibility.
Make sure no parts of the coolant circuit get dam-
aged during transport and installation of the appli-
ance.
If the coolant circuit is damaged:
If the coolant circuit is damaged:
If the coolant circuit is damaged:
If the coolant circuit is damaged:
• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is
installed and
• contact an authorized technician.

Transport and Packaging

Transport
Transport
Transport
Transport the appliance
Transport the appliance
Transport the appliance
Transport the appliance
Do not place the unit on its side during transport.
It is recommended not to exceed the tilt angle of
45 degrees, in the best case the appliance is trans-
ported in a vertical position. It is absolutely necessary
to allow the appliance standing upright for a few
hours before installation "Prior to first use". Protect
the appliance during transport against weather influ-
ences.
user maintenance shall not be made by children
user maintenance
user maintenance
and Packaging
and Packaging
and Packaging
NOTE: : : :
NOTE
NOTE
NOTE
The appliance has wheels which facilitate the
transport and installation of the appliance.
Unpacking the appliance
Unpacking the appliance
Unpacking the appliance
Unpacking the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE
NOTE
NOTE
NOTE: : : :
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".
18
children
children unless
children

Advertisement

Table of Contents
loading

Table of Contents