Table of Contents
Advertisement
Available languages
Available languages
Coolant
WARNING: Risk of fire / flammable
materials
The coolant circuit of this unit contains the refrigerant
Isobutane (R290), a natural gas that is flammable
and of high environmental compatibility. Make sure
no parts of the coolant circuit get damaged during
transport and installation of the appliance.
If the coolant circuit is damaged:
• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is
installed and
• contact an authorized technician.
Transport and packaging
Transport the appliance
Transport the appliance, if possible, in vertical posi-
tion. Otherwise, it is absolutely necessary to allow
the appliance standing upright for a few hours before
"Prior to first use"
installation
during transport against weather influences.
NOTE: Castors are series-dependent!
If the appliance has castors, it makes it easier for you
to transport or install the appliance. Tilt the appliance
slightly backwards and move it carefully.
CAUTION:
Use the castors only for forward or backward move-
ment, otherwise the floor and castors could be dam-
aged.
Unpacking the appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
. Protect the appliance
Dispose of packaging materials that are no longer
required in accordance with the locally applicable
regulations.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter
Appliance equipment
Appliance overview
Delivery scope
6x grid shelf, 2x key for door lock
Conditions for the installation location
• Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
17
"Cleaning and maintenance"
1 Recirculation fan
2 Temperature control /
on/off switch for-
interior light
3 Grid shelves
4 Door lock
5 Feet
Installation
.
Advertisement
Table of Contents
