Miller Millermatic Spoolmate 185 Spool Gun Owner's Manual page 33

4-6. Aligning Drive Rolls and Wire Guide
Tools Needed:
Correct
4
3
2
1
Incorrect
5
Y Turn Off power.
View is from top of drive rolls look-
ing down with pressure assembly
open.
1 Drive Roll Securing Nut
2 Drive Roll
3 Wire Guide
4 Welding Wire
5 Drive Gear
Insert screwdriver, and turn screw
in or out until drive roll groove lines
up with wire guide.
Close pressure roll assembly.
Ref. ST-800 412-A
OM-1322 Page 29