Commercial Electric CE-2701-WH Use And Care Manual page 9

Motion sensor light controller
Hide thumbs Also See for CE-2701-WH:
Table of Contents

Advertisement

Operation (continued)
6
Adjusting the HI/LO Light Level
HI level security lighting and LO level accent lighting.
HI-LO feature is off. Works with motion sensor after dark at 100% brightness.
Dusk-to-dawn timer:
Lights will come on automatically at dusk at approximately 25% brightness
and stay on until dawn. Lights will come on at 100% brightness when motion
is detected after dark. At dawn, the lights will shut off completely.
(Timer Mode):
The "Seasonally Adjusted Timer" will turn on the
lights at 25% brightness at dusk and then turn
them off in the middle of the night hours. This is
calculated automatically by the sensor. The lights
will come on at 100% brightness when the sensor
detects motion after dark.
7
Adjust the Dusk Learn
If desired, you can set the level of darkness at which the sensor
becomes active and at which the HI-LO feature comes on in the
"LO" accent mode.
Press once: To learn the current level of darkness and set this as your new "Dusk"
level. The lights will flash twice after 10 seconds to confirm that your new dusk
level has been set.
Press twice within 5 seconds: Back to factory default setting 0~10 Lux. The lights
will flash twice to indicate that the dusk level has been reset to the factory setting.
8
Adjusting the Time
TEST mode:
This will allow you to test the sensor and make any necessary adjustments
to the coverage area that you want the sensor to see.
ECO mode:
The motion sensor lighting is set to minimize power usage. Lights turn on
with motion for 10 seconds and continue to stay on as long as motion is
detected. Lights will dim to warn that lights will be shutting off soon.
ON-TIME:
1 min, 5 min, or 10 min. Lights stay for the time set, after motion is no longer detected.
NOTE: If the light or bulbs are not dimmable, the HI-LO
function will automatically be turned off by the sensor,
even if the knob is turned to one of the HI-LO settings.
This replacement motion sensor may not be suitable for all
light fixtures in the market, such as metal halide or high
pressure sodium lights.
9
Please contact 1-877-527-0313 for further assistance.
HI-
LO
O
DUSK
LEARN
TIME
1min
5
10
HOMEDEPOT.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ce-2701-bz10023150021002314998

Table of Contents